APPROPRIATE INDUSTRIES & APPLICATIONS
| FOOD INDUSTRY | GAS SUPPLY |
GENERAL PURPOSE | HEATING SYSTEMS | POTABLE WATER SUPPLY | SHIPBUILDING | STEAM SUPPLY | WATER SUPPLY |
| Composition |
Engineered bio-soluble mineral fibers, aramid fibers, inorganic fillers, NBR binder. Optional steel wire mesh reinforcement.
|
| Color |
Dark green |
| Approvals and compliances |
| BAM (oxygen) | BS 7531 Grade X | DVGW DIN 30653 | | DVGW DIN 30653 (5 bars) | DVGW DIN 3535-6 | EC 1935/2004 | | TZW W270 |
|
| Sheet dimensions |
Size (mm): 1500 x 1500 | 3000 x 1500 | 4500 x 1500
Thickness (mm): 0.5 | 1.0 | 1.5 | 2.0 | 3.0
Other sizes and thicknesses available on request
|
| Tolerances |
± 5 % on length and width
On thickness up to 1.0 mm ± 0.1 mm
On thickness above 1.0 mm ± 10 %
|
| Surface finish |
Standard: 4AS. Optional: graphite or PTFE.
|
TECHNICAL DATA
Typical values for 2 mm thickness
| Density
|
DIN 28090-2 |
g/cm3 |
1.8 |
| Compressibility
|
ASTM F36J |
% |
7 |
| Recovery
|
ASTM F36J |
% |
55 |
| Tensile strength
|
ASTM F152 |
MPa |
7 |
| Residual stress
|
DIN 52913 |
|
|
| 50 MPa, 175°C, 16 h
|
|
MPa |
35 |
| 50 MPa, 300°C, 16 h
|
|
MPa |
30 |
| Specific leak rate
|
DIN 3535-6 |
mg/(s·m) |
0.06 |
| Thickness increase
|
ASTM F146 |
|
|
| Oil IRM 903, 150°C, 5 h
|
|
% |
8 |
| ASTM Fuel B, 23°C, 5 h
|
|
% |
10 |
| Compression modulus
|
DIN 28090-2 |
|
|
| At room temperature: εKSW
|
|
% |
7.6 |
| At elevated temperature: εWSW/200°C
|
|
% |
11.4 |
| Creep relaxation
|
DIN 28090-2 |
|
|
| At room temperature: εKRW
|
|
% |
3.2 |
| At elevated temperature: εWRW/200°C
|
|
% |
0.8 |
| Maximum operating conditions
|
|
|
|
| Peak temperature
|
|
°C/°F |
350/662 |
| Continuous temperature
|
|
°C/°F |
270/518 |
| Continuous temperature with steam
|
|
°C/°F |
230/446 |
| Pressure
|
|
bar/psi |
100/1450 |
P-T diagram EN 1514-1, Type IBC, PN 40, DIN 28091-2 / 3.8, 2 mm
P-T diagrams indicate the maximum permissible combination of internal pressure and service temperature which can be simultaneously applied to a given gaskets thickness, size and tightness class. Given the wide variety of gasket applications and service conditions, these values should only be regarded as a guidance for the proper gasket assembly. In general, thinner gaskets exhibit better P-T properties.
-
General suitability - Under common installation practices and chemical compatibility
-
Conditional suitability - Appropriate measures ensure maximum performance for joint design and gasket installation. Technical consultation is recommended
-
Limited suitability - Technical consultation is mandatory.
BO DIAGRAMS DIN 28090-1
σBO diagrams represent σBO values for different gasket material thicknesses. These values indicate the maximum in-service compressive pressures which can be applied on the gasket area involved without destructing or damaging the gasket material.
CHEMICAL RESISTANCE CHART
| Acetamide |
 |
| Acetic acid, 10% |
|
| Acetic acid, 100% (Glacial) |
 |
| Acetone |
 |
| Acetonitrile |
|
| Acetylene (gas) |
|
| Acid chlorides |
|
| Acrylic acid |
|
| Acrylonitrile |
|
| Adipic acid |
|
| Air (gas) |
|
| Alcohols |
|
| Aldehydes |
|
| Alum |
|
| Aluminium acetate |
|
| Aluminium chlorate |
|
| Aluminium chloride |
|
| Aluminium sulfate |
|
| Amines |
|
| Ammonia (Gas) |
|
| Ammonium bicarbonate |
|
| Ammonium chloride |
|
| Ammonium hydroxide |
|
| Amyl acetate |
|
| Anhydrides |
|
| Aniline |
|
| Anisole |
|
| Argon (gas) |
|
| Asphalt |
|
| Barium chloride |
|
| Benzaldehyde |
|
| Benzene |
|
| Benzoic acid |
|
| Bio-diesel |
|
| Bio-ethanol |
|
| Black liquor |
|
| Borax |
|
| Boric acid |
|
| Butadiene (gas) |
|
| Butane (gas) |
|
| Butyl alcohol (Butanol) |
|
| Butyric acid |
|
| Calcium chloride |
|
| Calcium hydroxide |
|
| Carbon dioxide (gas) |
|
| Carbon monoxide (gas) |
|
| Cellosolve |
|
|
|
| Chlorine (in water) |
|
| Chlorobenzene |
|
| Chloroform |
|
| Chloroprene |
|
| Chlorosilanes |
|
| Chromic acid |
|
| Citric acid |
|
| Copper acetate |
|
| Copper sulfate |
|
| Creosote |
|
| Cresols (Cresylic acid) |
|
| Cyclohexane |
|
| Cyclohexanol |
|
| Cyclohexanone |
|
| Decalin |
|
| Dextrin |
|
| Dibenzyl ether |
|
| Dibutyl phthalate |
|
| Dimethylacetamide (DMA) |
|
| Dimethylformamide (DMF) |
|
| Dioxane |
|
| Diphyl (Dowtherm A) |
|
| Esters |
|
| Ethane (Gas) |
|
| Ethers |
|
| Ethyl acetate |
|
| Ethyl alcohol (Ethanol) |
|
| Ethyl cellulose |
|
| Ethyl chloride (gas) |
|
| Ethylene (gas) |
|
| Ethylene glycol |
|
| Formaldehyde (Formalin) |
|
| Formamide |
|
| Formic acid, 10% |
|
| Formic acid, 85% |
|
| Formic acid, 100% |
|
| Freon-12 (R-12) |
|
| Freon-134a (R-134a) |
|
| Freon-22 (R-22) |
|
| Fruit juices |
|
| Fuel oil |
|
| Gasoline |
|
| Gelatin |
|
| Glycerine (Glycerol) |
|
| Glycols |
|
| Helium (gas) |
|
| Heptane |
|
| Hydraulic oil (Glycol based) |
|
| Hydraulic oil (Mineral) |
|
| Hydraulic oil (Phosphate ester-based) |
|
| Hydrazine |
|
| Hydrocarbons |
|
| Hydrochloric acid, 10% |
|
| Hydrochloric acid, 37% |
|
| Hydrofluoric acid, 10% |
|
| Hydrofluoric acid, 48% |
|
| Hydrogen (gas) |
|
| Iron sulfate |
|
| Isobutane (Gas) |
|
| Isooctane |
|
| Isoprene |
|
| Isopropyl alcohol (Isopropanol) |
|
| Kerosene |
|
| Ketones |
|
| Lactic acid |
|
| Lead acetate |
|
| Lead arsenate |
|
| Magnesium sulfate |
|
| Maleic acid |
|
| Malic acid |
|
| Methane (Gas) |
|
| Methyl alcohol (Methanol) |
|
| Methyl chloride (Gas) |
|
| Methylene dichloride |
|
| Methyl ethyl ketone (MEK) |
|
| N-Methyl-pyrrolidone (NMP) |
|
| Milk |
|
| Mineral oil type ASTM 1 |
|
| Motor oil |
|
| Naphtha |
|
| Nitric acid, 10% |
|
| Nitric acid, 65% |
|
| Nitrobenzene |
|
| Nitrogen (Gas) |
|
| Nitrous gases (NOx) |
|
| Octane |
|
| Oils (Essential) |
|
| Oils (Vegetable) |
|
| Oleic acid |
|
| Oleum (Sulfuric acid, fuming) |
|
| Oxalic acid |
|
| Oxygen (gas) |
|
| Palmitic acid |
|
| Paraffin oil |
|
| Pentane |
|
| Perchloroethylene |
|
| Petroleum (Crude oil) |
|
| Phenol (Carbolic acid) |
|
| Phosphoric acid, 40% |
|
| Phosphoric acid, 85% |
|
| Phthalic acid |
|
| Potassium acetate |
|
| Potassium bicarbonate |
|
| Potassium carbonate |
|
| Potassium chloride |
|
| Potassium cyanide |
|
| Potassium dichromate |
|
| Potassium hydroxide |
|
| Potassium iodide |
|
| Potassium nitrate |
|
| Potassium permanganate |
|
| Propane (gas) |
|
| Propylene (gas) |
|
| Pyridine |
|
| Salicylic acid |
|
| Seawater/brine |
|
| Silicones (oil/grease) |
|
| Soaps |
|
| Sodium aluminate |
|
| Sodium bicarbonate |
|
| Sodium bisulfite |
|
| Sodium carbonate |
|
| Sodium chloride |
|
| Sodium cyanide |
|
| Sodium hydroxide |
|
| Sodium hypochlorite (Bleach) |
|
| Sodium silicate (Water glass) |
|
| Sodium sulfate |
|
| Sodium sulfide |
|
| Starch |
|
| Steam |
|
| Stearic acid |
|
| Styrene |
|
| Sugars |
|
| Sulfur |
|
| Sulfur dioxide (Gas) |
|
| Sulfuric acid, 20% |
|
| Sulfuric acid, 98% |
|
| Sulfuryl chloride |
|
| Tar |
|
| Tartaric acid |
|
| Tetrahydrofuran (THF) |
|
| Titanium tetrachloride |
|
| Toluene |
|
| 2,4-Toluenediisocyanate |
|
| Transformer oil (Mineral type) |
|
| Trichloroethylene |
|
| Vinegar |
|
| Vinyl chloride (gas) |
|
| Vinylidene chloride |
|
| Water |
|
| White spirits |
|
| Xylenes |
|
| Xylenol |
|
| Zinc sulfate |
|
